Solutions Details

Home solutions

Assembly/Pasting and Storage of Membrane Switch in Lunfeng

2025-07-18

latest company case about Assembly/Pasting and Storage of Membrane Switch in Lunfeng 0

Thank you for choosing Lunfeng Technology—we’re delighted to assist! Proper use of membrane switches, including correct pasting and storage, is key to avoiding damage and extending their lifespan. Below are essential guidelines:

Pasting Steps:

Clean: Ensure the surface (liner, casing, or target area) is smooth, rust-free, oil-free, and dust-free.
Check fit: Position the unpeeled switch at the target area to verify proper sizing.
Align: Peel ~10mm of backing (preferably from a button-free edge), attach to the correct spot, confirm alignment, then proceed.
Apply: Peel and stick gradually, keeping the switch’s curvature ≤15°.

Pasting Notes:

Paste once—no repositioning, as this harms adhesive performance.
Keep curvature ≤15°. Press buttons only when flat; avoid pressing with no liner or when buttons are suspended (may damage metal domes or cause short circuits).

Storage Notes:

Keep the protective transparent films on both sides to prevent scratches on surfaces or display windows.
After removing some from the original package, re-tie the rest loosely as before.
Store tactile products upright to prevent button feedback weakening from long-term pressure.
Protect cables/connectors—do not place them facing down.
Avoid forcefully bending window-equipped or tactile products (may cause short circuits, dome failure, or render the switch useless).
Store at room temperature, away from dust, moisture, and corrosive gases (acidic, alkaline, etc.).

Solutions Details

Home solutions

Assembly/Pasting and Storage of Membrane Switch in Lunfeng

2025-07-18

latest company case about Assembly/Pasting and Storage of Membrane Switch in Lunfeng 0

Pasting Steps:

Clean: Ensure the surface (liner, casing, or target area) is smooth, rust-free, oil-free, and dust-free.
Check fit: Position the unpeeled switch at the target area to verify proper sizing.
Align: Peel ~10mm of backing (preferably from a button-free edge), attach to the correct spot, confirm alignment, then proceed.
Apply: Peel and stick gradually, keeping the switch’s curvature ≤15°.

Pasting Notes:

Paste once—no repositioning, as this harms adhesive performance.
Keep curvature ≤15°. Press buttons only when flat; avoid pressing with no liner or when buttons are suspended (may damage metal domes or cause short circuits).

Storage Notes:

Keep the protective transparent films on both sides to prevent scratches on surfaces or display windows.
After removing some from the original package, re-tie the rest loosely as before.
Store tactile products upright to prevent button feedback weakening from long-term pressure.
Protect cables/connectors—do not place them facing down.
Avoid forcefully bending window-equipped or tactile products (may cause short circuits, dome failure, or render the switch useless).
Store at room temperature, away from dust, moisture, and corrosive gases (acidic, alkaline, etc.).

Metal Dome Membrane Switch

PET Membrane Switch

Flat Membrane Switch

Waterproof Membrane Keypad

LED Membrane Keypad

FPC Membrane Switch

Backlight Membrane Switch

Membrane Switch Overlay

Capacitive Membrane Keypad

Silicone Rubber Keypad

Graphic Panel Overlay

Acrylic Front Panel

Aluminum Nameplate

FPC Flexible Circuit Board

Capacitive Touch Panel

Resistive Touch Panel

Silver Sticker Label

Metal Dome Membrane Switch

PET Membrane Switch

Flat Membrane Switch

Waterproof Membrane Keypad

LED Membrane Keypad

FPC Membrane Switch

Backlight Membrane Switch

Membrane Switch Overlay

Capacitive Membrane Keypad

Silicone Rubber Keypad

Graphic Panel Overlay

Acrylic Front Panel

Aluminum Nameplate

FPC Flexible Circuit Board

Capacitive Touch Panel

Resistive Touch Panel

Silver Sticker Label

Assembly/Pasting and Storage of Membrane Switch in Lunfeng

Assembly/Pasting and Storage of Membrane Switch in Lunfeng

Pasting Steps:

Pasting Notes:

Storage Notes:

Assembly/Pasting and Storage of Membrane Switch in Lunfeng

Assembly/Pasting and Storage of Membrane Switch in Lunfeng

Pasting Steps:

Pasting Notes:

Storage Notes: